TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 189 / 290
In the beginning, the Virtual table is empty:
So you must first define, using the link Add New, up to four Virtual Table entries (VT1 to VT4):
Figure 5-124: Ading new entries into the Virtual Routing Table.
Each of the four VT entries may join up to six interfaces of the Bytton equipment.
Choose for every VT entry the corresponding interfaces (IF1 to IF6) from the drop list:
Next, you will define the routes for each of these Virtual Routing entries.
For this, use the links located at the bottom of the page:
VT Links
