TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 99 / 290
You can define as many bridges as you need::
Figure 5-46: Several entries in the “Bridge” table.
Once you define a bridge (br1, br2, br3 in these examples), they show up in Bridge Status:
Figure 5-47: Bridges showing up in “Bridge Status”.
And also the program automatically inserts the corresponding routes for them:
Figure 5-48: The same bridges in the “Routes” table.
And it also adjusts the Linux firewall to permit the packets to flow freely over the newly created interfaces.
