TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 251 / 290
PIN SIM0
: enter PIN code for the first SIM card.
Service Center Number
: full telephone number for the first SIM.
In order for the SMS facility to operate, you must set the correct number. This is the SMS center of the first
GSM operator. Enter here the full phone number of the GSM carrier between quotes, like “+40744946000”
in this example:
Figure 5-216: PIN for first SIM card and corresponding SC Number
.
PIN SIM1
: enter PIN code for the respective SIM card.
“
1234
” is the default value, which does NOT mean that the code is really 1234, instead it means “no PIN is
required”.
Thus , when the SIM has set a Pin code of “
0000
”, you
must
use this value in the PIN SIM field, otherwise
the SIM card will be locked!
Service Center Number Sim1
: full telephone number for the second carrier.
In order for the SMS facility to operate, you must set the correct number.
This is the SMS center of the respective mobile operator.
Enter the full phone number of the GSM carrier between quotes, like “+407402004000” or
“+40744946000” in these examples.
SIM Settings for the Single-SIM Bytton LTE
In case of equipments that a single slot for SIM cards, there is just one PIN and SCN entry, as shown.
Audio Settings
The settings at the bottom are valid only for Bytton equipments with voice capabilities (the current model
does not have an FXS port).
Volume level
: for setting the volume (sound) level.
Of course, this setting has meaning only in case of Bytton LTE equipments with voice capabilities (that
feature FXS interface)
Valid settings for the audio level are from 0 to 4, where 0 means “mute”.
Depending of the type of modem module used, you may have a single Audio setting, or independent
settings for transmission (Tx) and respectively reception (Rx).
Figure 5-217: Audio Settings for TX and RX
.
