TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 266 / 290
To configure IPERF on Bytton, in the field
IPERF, choose Client instead of the default
Disabled.
Complete the correct IP address in the filed
“Test Server”.
Specify the scheduling time interval, in minutes,
in the field “Schedule” – the default value is one
minute.
Figure 5-246: Configuring IPERF for BW testing over Bytton.
5.8.4 Actual Speed Test Results
The values determined by means of the “BW Test” web page are more accurate, but you may also use
different freely available “Internet Speed Test” sites.
The results from some of these sites are shown here:
“My 3G speed”, download and upload:
Figure 5-247: Download and Upload speed tests on “My 3G speed” site.
