TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 192 / 290
VT Status
Shows the detailed state of the Virtual Routing Tables. A few examples are shown below:
When no virtual Routes have been yet defined on Bytton:
Virtual RT status
Show Rule
0:
from all lookup local
32766:
from all lookup main
32767:
from all lookup default
Show Route
target gateway source proto scope dev tbl
10.64.64.65 10.81.121.148 kernel link ppp1
172.168.1.0/ 24 172.168.1.1 kernel link br0
default 10.64.64.65 ppp1
127.255.255.255 broadcast 127.0.0.1 kernel link lo local
10.81.121.148 local 10.81.121.148 kernel host ppp1 local
172.168.1.0 broadcast 172.168.1.1 kernel link br0 local
172.168.1.1 local 172.168.1.1 kernel host br0 local
172.168.1.255 broadcast 172.168.1.1 kernel link br0 local
127.0.0.0 broadcast 127.0.0.1 kernel link lo local
127.0.0.1 local 127.0.0.1 kernel host lo local
127.0.0.0/ 8 local 127.0.0.1 kernel host lo local
Figure 5-129: Show Route in VT Status.
As you can see, there is no “Virtual Table x” sections, just the general rules and respectively routes active
on the equipment are shown!
After you have defined Virtual routing tables 1 and 2:
Virtual Table VT1
10.0.59.64/30 dev br0 proto static scope link metric 20
10.0.0.0/24 dev br0 proto static scope link
10.0.0.0/24 via 10.0.0.1 dev br0 proto static metric 15
172.27.0.0/16 dev lan0 proto static scope link
Route List Virtual Table VT1
target gateway source proto scope dev tbl
10.0.59.64/ 30 static link br0
10.0.0.0/ 24 static link br0
10.0.0.0/ 24 10.0.0.1 static br0
172.27.0.0/ 16 static link lan0
Virtual Table VT2
172.27.0.0/16 dev lan0 proto static scope link
10.0.0.0/16 via 10.0.0.1 dev br0 proto static metric 15
Show Rule
0:
from all lookup local
1011:
from all iif br0 lookup VT1
1012:
from all iif lan0 lookup VT1
1023:
from all iif lan0 lookup VT2
1024:
from all iif ppp1 lookup VT2
1031:
from all iif lan0 lookup VT3
1032:
from all iif ppp1 lookup VT3
1041:
from all iif br0 lookup VT4
1042:
from all iif lan0 lookup VT4
1043:
from all iif tap0 lookup VT4
32766:
from all lookup main
32767:
from all lookup default
