TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 85 / 290
Example of usage for “Filter List MAC”:
1. First, identify the MAC of the device that you want to connect to the bytton ICR equipement, such
as the ntework card of the PC computer in this case:
2. Enter this physical address into the field MAC, after choosing Allow as action for the MACs in the
list:
3. Save this configuration and Add new MAC values, if required:
4. When all required MAC values are entered, use Commit to make permament these settings
5. After reboot, Bytton will take into consideration only the equipment that features on the
corresponding Ethernet pot the MAC that you have
