Engineer Programming
Page 62
Quick Keys
Parameter
Default
Range
Exit Delay 2
45 seconds
01-255 seconds
Duration of exit delay 2.
Bell Timeout
15 minutes
01-90 minutes
Duration of the external sounder(s) during alarm.
Bell Delay
00 minutes/seconds
00-90 minutes/seconds
The time delay before the keypad sounder and the external sounder
operate after the onset of an alarm.
Switch Aux Break
10 seconds
00-90 seconds
The time that the power supplied to the system's smoke detectors through
the programmable output is interrupted during a user-initiated smoke
detector reset, typically performed after a fire alarm or automatically
when a fire verification is defined in the system control. (Refer to Double
Verification of Fire Alarms, page 68, for additional details.)
Note
This feature is supported through any programmable output that is
defined as Switch AUX .
Wireless
Specifies the time intervals relating to the operation of the wireless
module
Jamming Time
None
None, 10, 20 or
30 seconds
Specifies the period of time that the LightSYS's wireless module tolerates
unwanted radio frequencies capable of blocking (jamming) signals
produced by the system's transmitters. Once the specified time is reached,
the main panel sends a report code to the alarm receiving center. (Refer to
Jamming Fault
, page 199.)
NONE
10 SEC
20 SEC
30 SEC
NONE:
No jamming will be detected or reported.
Note:
Different sounds will be produced when jamming is detected, depending
on the defined Audible Jamming time
