EN 50131 and EN 50136 Compliance
Page 223
In order to have an indication of ACK received from the receiving center transceiver,
the parameter Kiss-Off Y/N (see page 4-54) should be set to Y.
Possible logical keys calculations:
Logical codes are codes punched in the wireless keypad to allow Level 2 (users) and
Level 3 (engineer) access.
All codes - 4 digits structure: xxxx
0-9 can be used for each digit.
There are no disallowed codes - codes from 0001 to 9999 are acceptable.
Invalid codes cannot be created due to the fact that after the code 4
th
digit has been
punched, "Enter" is automatically applied. Code is rejected when trying to create a non
existing code
.
Possible physical keys calculations:
Physical keys are implemented in the Wireless Keyfobs.
It is assumed that only a user possesses a Keyfobs, therefore a physical key is
considered as access Level 2
Each Keyfob has 24 bit identification code comprising 2^24 options.
A Keyfob has to be recognized and registered by the LightSYS, therefore, a "write"
process must be performed.
A valid Keyfob is one "Learned" by the panel and allowing Set/Unset
A non valid Keyfob is one not "Learned" by the panel and not allowing Set/Unset.
System Monitoring
The main unit is monitored for AC fault, battery fault, low battery and more.
All other wireless elements are monitored for low voltage battery
.
