Engineer Programming
Page 118
Note:
The XX in the PO=XX refers to the number of the Programmable output
currently being programmed
.
2.
Use the
key to toggle between
Y
Yes and
N
No to designate the partition(s)
that will activate the selected Programmable output (PO),
-OR-
Press the partition number [1 to 4] to select or deselect it
3.
Press
and proceed to Pattern of Operation, page 120 , to set the pattern and
duration of operation
Follow Zone
The Zone menu contains Programmable output parameters that follow the Zone
Event. Each Programmable output can be activated by a group of up to five zones
To access the Zone sub-menus:
1.
Access the outputs menu, as described on page 110.
2.
From the Programmable output menu, press [3]. The following display appears
:
PO=01 FOLLOWS:
3) ZONE
3.
Press
to access the Zones menu. The following display appears:
ZONE EVENT: PO=01
1) ZONE FOLLOW
4.
Select the zone event type to be followed from the following list:
Programmable output: Zone
Quick Keys
Parameter
Zone Follow
Activates the programmable output when the selected zone is
tripped.
The tripped zone need not be set to trigger the programmable output.
Alarm Follow
Activates the programmable output when the selected zone causes an
alarm.
Set Follow
Activates the programmable output when the selected zone is set by
the system.
