Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 76 / 260

69
If you have closed the output window, select View > floating window > output
window from the menu bar to display the output window again.
5.7 How to monitor and debug the program
After the program is downloaded, you can use the "debug" toolbar diagnostic
function.
Debug Toolbar
：
You can find the toolbar instructions in the “ detailed annotation of operation
interface
”
.
What is "state monitoring"?
State monitoring shows the current value of the PLC data and the information of the
current state.You can monitor, read, write, and enforce PLC data values by using the
status table.When the program runs, there are two ways to view the PLC data
dynamics.
Status table monitoring Displays the data status in the table: you can specify
address, data type, value, and forced.
Program status monitoring Displays data status in the program editor window:
the current PLC data value is displayed on the STL statement or LAD graph.
Program status monitor window and status table monitor window can be run