Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 206 / 260

199
6.16.2 TONR
Input/output Operand Data type
Txxx Constant(T0
—
T255) word
IN (LAD) Enable bit Boolean
IN (FBD) I, Q, M, SM, T, C, V, S, L,Enable bit Boolean
PT VW, IW, QW, MW, SW, SMW, LW, AIW, T, C, AC,constant, *VD, *LD, *AC Integer
TONR: When the value of the input
“
IN
”
is equal to 1,
timer starts time.Timer current value of Txxx is the current
time (a multiple of the time base).When the current value
of the timer is equal to the preset time (PT), the value of
the timer bit is 1.When the value of the input
“
IN
”
is equal
to 0, If the current value of the timer is less than the
preset value
，
timer current value is retained.Otherwise, the current value of the
timer is cleared.
Notes
：
You can use TONR to accumulate multiple time intervals.
You can use the "recovery" (R) instruction to recover any timer.
You can only use the "recovery" instruction to recovery the TONR timer.
Example: