Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 94 / 260

87
6.4.2 Integer comparison
Input / output
Operand
Data type
Input IW, QW, MW, SW, SMW, T, C, VW, LW, AIW, AC, constant, *VD, *LD,*AC Integer
output
（
FBD
）
I, Q, M, SM, T, C, V, S, L, Enable bit Boolean
Comparison instructions are used for comparing two values
：
IN1
and IN2.
Comparison includes
：
IN1 = IN2
、
IN1 >= IN2
、
IN1 <= IN2
、
IN1 >
IN2
、
IN1 < IN2 or IN1 <> IN2.
Integer comparison with symbol (16#7FFF > 16#8000).
In LAD, when the comparison result is true, the contact
will be open.
In FBD, when the comparison result is true, the output
will be open.
Attention
：
The following conditions are serious errors .
These errors will cause the PLC to immediately stop the
execution of the program:
1.Enter illegal indirect address.
2.Enter the illegal real number.
Example: