Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 103 / 260

96
NNN is greater than 5, the output is displayed as a string of 12 ASCII space characters.
C decides to use a comma or a decimal point between integer and decimal .The 4 bits
above the top of the format must be zero.
6.5.8 BCD to integer, integer to BCD conversion
Input/output
Operand
Data type
IN (LAD, FBD) VW, IW, QW, MW, SW, SMW, LW, T, C, AIW, AC, constant, *VD, *AC, *LD word
OUT VW, IW, QW, MW, SW, SMW, LW, T, C, AC, *VD, *LD, *AC word
The BCD -I instruction converts the binary coded decimal
value to the integer value, and loads the result into the
variable specified by the OUT. “ IN ” BCD value range is 0 to
9999.Integer to BCD instruction converts the integer value
to binary coded decimal value and loads the result into
the variable specified by the OUT.The range of input
values is 0 to 9999.
Example: