Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 199 / 260

192
6.15.3 Add to table
Input/output Operand Data type
DATA VW, IW, QW, MW, SW, SMW, LW, T, C, AIW, AC,constant, *VD, *LD, *AC integer
TBL VW, IW, QW, MW, SW, SMW, LW, T, C, *VD, , *LD *AC word
AD -T- TBL: The instruction adds the word (DATA) to the
table (TBL).The first value in the table is the maximum
length of the table .The second value is the entry count
(EC),it specifies the number of entries in the table.Each
time you add new data to the table,the number of entries
adds 1.Table can contain up to 100 entries
，
not including
the first entry and the second entry.
error conditions:
0006 Indirect address
0091 Operand range
SM1.4 Table overflow
Special memory bit:
SM1.4 Table overflow
For example:
PLC program
：
Data block: