Rievtech PR-12 Series, User Manual And Programmers Manual

Page: 44 / 260

37
5.2 toolbar
5.2.1 New ： New command is used to create a new project, you can use the
shortcut CTRL + N to create a new project.
5.2.2 Open ：
Open an existing project, VCW format files, which can be opened by
the shortcut CTRL + O. Opening the PWM is the PWM format file, can use the shortcut
CTRL + P to open.
5.2.3 Save ： Save the current edit program, you can use the shortcut CTRL
+ S to save.
5.2.4 Undo ： Returns to the last operation,you can send multiple “ undo ”
command.If you send out "open" and "off" or "save" or "compile" command,
"undo" buffer is cleared.Your next action is recorded as the beginning
of a new "undo" order.Can use the shortcut CTRL + Z to undo operation.
5.2.5 Redo:Contrary to the function of the undo.
5.2.6 Cut:Select an object, cut it, and place it in the WINDOWS clipboard
buffer.
5.2.7 Copy:Select the object, copy the operation, and the copy of the
object is placed in the WINDOWS clipboard buffer.
5.2.8 Paste ： Stick the cut or copied object in the selected area.
5.2.9 Symbolic addressing ： After the start symbol editing function, it
will display the symbol of the annotation.
5.2.10 Compile:Compile the program of the current page.
5.2.11 Compile all:Compile all project components (program block, data
block and system block).
5.2.12
Upload:
Read the program from the PLC,ensure that communication is
normal.Program is read to a new project, can be saved and named.You can
use the shortcut CTRL + U to read.
5.2.13 Download:Write program to the PLC,Compiler success and then click
the download or use the shortcut CTRL + D to download the program.