120
3
Taking Pic
tures
6
Press the
3
button.
The camera returns to capture mode.
Refer to the following “Manual Setting” for instructions on adjusting
the white balance manually.
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way controller
(
23
) to select
K
(Manual).
2
Point the camera at the blank
sheet of paper or other material
so that it fills the frame displayed
in the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the
4
button.
The setting is saved and the screen returns to the [
A
Rec. Mode]
menu.
5
Press the
3
button.
The camera returns to capture mode.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.130).
Saving the White Balance setting
1
p.149
Manual Setting
OK
OK
OK
OK
MENU
MENU
Cancel
Cancel
OK
OK
MENU
Cancel
White Balance
Adjust
Adjust
Adjust
SHUTTER
SHUTTER
Adjust
SHUTTER
WG20_OPM_ENG.book Page 120 Wednesday, February 5, 2014 2:20 PM
