User Manual
Reference number: 4111A-RADAR4600-GBD-R1.1
Date: 27 February 2018
Page 22 of 149
2.2.10
Different kinds and states of selector buttons
Switch and Selector buttons are shown in different ways, depending on switch status and to point out the
way of proceeding.
Switch button in Off state.
Switch button in On state.
Darkened switch button, which is not available in actual situation.
Selector button (greyed shadowed) for dedicated cursor function – in deactivated
state.
Selector button (blue shadowed) for dedicated cursor function – in activated state.
Selector button not activated. The lightened little corner upside right indicates, that
alternatives are available by pop up.
Available alternatives – the blue button is the activated one. To
change, the needed grey button must be clicked.
Clicking pops up the alternatives.
Selected mode for Vector Length. The arrow buttons
points out, that higher or lower values are selectable.
By clicking into centre field, the next alternatives are
shown, which can be selected direct by clicking.
The arrow buttons are shown bright, because Vector
Length can be set to shorter and also to longer times.
