High-performance Embedded Workshop
2. Build Basics
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
53
Note:
Do NOT assume that any output from the tool you terminated is valid. It is recommended that you delete any output
files produced and ensure that the phase is executed again.
2.8.5
Deleting intermediate and output files produced in building
You can delete intermediate and output files (produced in building) included in the current configuration in the project.
To delete intermediate and output files included in the current configuration in the project
Select one of the following operations:
•
Select [
Build -> Clean Current Project
],
OR
•
Right-click on a project in the Projects tab of the workspace window. Select [
Build -> Clean Current
Project
] from the pop-up menu.
A confirmation dialog opens for you to select whether or not to delete all intermediate and output files produced in
building. To delete all files, select Yes. Otherwise select No or Cancel.
If you do not wish to open this confirmation dialog box, select the
Don’t ask this question again
checkbox.
To open the confirmation dialog box again
1.
Select [
Setup -> Options
]. The
Options
dialog box opens.
2.
Select the
Confirmation
tab.
3.
Select the
Clean project
checkbox. This checkbox is selected by default.
4.
Click OK.
To delete intermediate and output files in all projects of the workspace
Select one of the following operations:
•
Click the
Clean All Projects
toolbar button (
),
OR
•
Select [
Build -> Clean All Projects
],
OR
•
Right-click on a workspace in the
Projects
tab of the workspace window. Select [
Clean All Projects
] from the
pop-up menu.
A confirmation dialog opens for you to select whether or not to delete all intermediate and output files produced in
building. To delete all files, select Yes. Otherwise select No.
