High-performance Embedded Workshop
3. Advanced Build Features
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
76
Note
:
An error will be returned when the total number of characters of the command line options exceeds 256.
3.4.2
Output Files tab
This tab is where you can specify the output files that will be produced by the phase. Before each file is passed into this
phase, the High-performance Embedded Workshop checks that the output files are of a less recent date than the input
file. If so, the phase will be executed for that file (i.e. input files have been modified since the output file or files were
last produced). If the files are up-to-date then the phase will not be executed.
Note:
If no output files are specified, the phase will execute regardless.
To add an output file
1.
Click the
Add
button. The
Add Output File
dialog box will be invoked.
2.
Enter the file path or browse to it using the
Browse
button.
3.
Click the OK button to add this output file to the list.
To modify an output file
1.
Select the output file that you would like to modify.
2.
Click the
Modify
button. The
Modify Output File
dialog box opens.
3.
Modify the fields as required.
4.
Click the OK button to add the modified entry back to the list.
To remove an output file
1.
Select the output file that you would like to remove.
2.
Click the
Remove
button.
An output file’s path can include placeholders.
3.4.3
Dependent Files tab
This tab is where you can specify the dependent files that are needed by the phase. Before each file is passed into this
phase, the High-performance Embedded Workshop checks that the dependent files are of a more recent date than the
input file. If so, the phase will be executed for that file (i.e. dependent files have been modified since the input files was
last modified). If not, the phase will not be executed.
