High-performance Embedded Workshop
17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
269
8.
Set the options for the debugger targets selected in Step 8.
Core:
Specifies the target core.
Configuration name:
By default, the High-performance Embedded Workshop generates two configurations:
Release
and
Debug
. If a debugger target is selected, a configuration for the selected
target is also generated (an abbreviation including the target name). This configuration
name can be changed in
Configuration name
.
Sets the debugger target options. To modify an option, select
Item
and click
Modify
. If
the selected item cannot be modified,
Modify
remains gray even when
Item
is
selected.
Simulator I/O:
System call for standard I/O or file I/O from the user
program is enabled (
Enable
) or disabled (
Disable
).
Simulator I/O addr.:
Address for above system call.
Bus mode:
Currently cannot be used by the simulator/debugger.
Detail
options:
Initial session:
If
Initial session
is checked, this session becomes an initial
session.
To move to Step 9, click the
Next>
button in Step 8.