High-performance Embedded Workshop
1. Overview
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
17
Note:
*
. Support for this function depends on the debugger.
These files are specific to each user account on the host computer. When multiple versions of the High-performance
Embedded Workshop are installed, the files specific to each High-performance Embedded Workshop are saved for each
user account.
1.13
Overview of Configurations and Sessions
The drop-down list box on the
Standard
toolbar shows the current configuration and session.
This example shows the configuration and session in which the Renesas SuperH Standard toolchain was selected at
creation of a project and "SH-4 Simulator" was selected as the target debugging platform.
You can switch between different configurations and sessions by selecting one in the drop-down list box.
It is also possible to add or delete configurations or sessions as necessary.
•
Configuration
What is configuration?
Configurations are the build option settings (e.g., output of debug information or optimization) having their own names.
The term "configuration" can also be referred to as "build configuration".
In the figure of the
Standard
toolbar shown as an example, configurations "SimDebug_SH-4", "Debug", and "Release"
are available.
Configurations created by the High-performance Embedded Workshop
When a project is created after selection of the toolchain, the High-performance Embedded Workshop automatically
creates configurations "Debug" and "Release".
