High-performance Embedded Workshop
16. Using the Test Support Facility
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
242
•
To add a memory range
1.
Click on the
Add
button on the
Edit Test Memory Ranges
dialog box to open the
Add Memory Range
dialog box.
2.
Specify
Start address
,
End address
, and
Access size
to set
a memory range to be saved into a test-image file.
3.
Click OK.
•
To modify a memory range
1.
Click on the
Modify
button on the
Edit Test Memory Ranges
dialog box. The memory range selected in the
Memory ranges
list will be modified. Only one variable is selectable in the list. The
Modify Memory Range
dialog box opens.
2.
Specify
Start address
,
End address
, and
Access size
to set
a memory range to be saved into a test-image file.
3.
Click OK.
•
To remove a memory range
1.
Click on the
Remove
button on the
Edit Test Memory Ranges
dialog box. The memory range selected in the
Memory ranges
list will be deleted. Only one trace range is selectable in the list.
Then click OK.
16.6.1.6 Code-StackTrace (StackTrace window)
The following table shows information on the test-image data to be saved into test-image files and test results (not
matched).
