High-performance Embedded Workshop
3. Advanced Build Features
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
79
To show information about toolchain components, select a tool from the
Toolchain build phase
drop-down list on the
Change Toolchain Version
dialog box, and click the
Information
button. A tool information dialog box will show
you information about the tool. Click the
Close
button to close the dialog box.
3.8
Generating a makefile
The High-performance Embedded Workshop allows you to generate a makefile associated with your workspace. High-
performance Embedded Workshop is capable of generating hmake, nmake, and gnumake compatible files. The make
tool to execute makefiles is operated in the DOS command prompt and thus the use of makefiles allows you to build
projects without High-performance Embedded Workshop.
The generated makefiles can be executed in the High-performance Embedded Workshop. For details, see section 3.9,
Using a makefile inside the High-performance Embedded Workshop system.
To generate a makefile
1.
Open a workspace where you wish to generate a makefile (if the workspace includes two or more projects, the
active project must be one in which you wish to generate a makefile).
2.
Select a configuration for generating a makefile.
3.
Select [
Build -> Generate Makefile
]. The
Generate Makefile
dialog box opens.
