Red Hat 8.1 Command Reference Manual Download Page 165

Page: 165 / 372

Octet String Syntax Plug-in

151

Plug-in Parameter

Description

Description

Enables replication between two current
Directory Servers

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

Database

Performance Related Information
Further Information

Turn this plug-in off if one server will never
replicate. See the "Managing Replication"
chapter in the

Directory Server Administrator's

Guide

3.1.23. Octet String Syntax Plug-in

Plug-in Parameter

Description

Plug-in Name

Octet String Syntax

DN of Configuration Entry

cn=Octet String Syntax, cn=plugins, cn=config

Description

Syntax for handling octet strings

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Do not modify the configuration of this plug-
in. Red Hat recommends leaving this plug-in
running at all times.

Further Information

3.1.24. OID Syntax Plug-in

Plug-in Parameter

Description

Plug-in Name

OID Syntax Plug-in

DN of Configuration Entry

cn=OID Syntax,cn=plugins,cn=config

Description

Syntax for object identifiers (OID).

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Do not modify the configuration of this plug-
in. Red Hat recommends leaving this plug-in
running at all times.

Further Information

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands