Red Hat 8.1 Command Reference Manual Download Page 152

Page: 152 / 372

Chapter 2. Core Server Configuration Reference

138

OID

2.16.840.1.113730.3.1.202

Syntax

Binary

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.21. replicaEntryFilter

This attribute contains an LDAP filter to use to identify the entries to be replicated.

OID

2.16.840.1.113730.3.1.203

Syntax

IA5String

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.22. replicaHost

This attribute contains the hostname of the replica server.

OID

2.16.840.1.113730.3.1.197

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.23. replicaLastRelevantChange

This attribute stores the last relevant change in an entry.

OID

2.16.840.1.113730.3.1.408

Syntax

Integer

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.24. replicaNickName

This attribute contains the friendly name for the replication agreement.

OID

2.16.840.1.113730.3.1.204

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.25. replicaPort

This attribute contains the port number of the replica server.

OID

2.16.840.1.113730.3.1.48

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands