Red Hat 8.1 Command Reference Manual Download Page 306

Page: 306 / 372

Chapter 7. Command-Line Scripts

292

Option

Description

described in the

Directory Server Administrator's

Guide

. Define additional VLV tags by creating

them in LDIF and adding them to Directory
Server's configuration, as described in the

Red

Hat Directory Server Administrator's Guide

. Red

Hat recommends using the DN of the entry for
which to accelerate the search sorting.

Table 7.17. vlvindex Options

7.4. Perl Scripts

This section describes the following Perl scripts:

•

Section 7.4.1, “bak2db.pl (Restores a Database from Backup)”

•

Section 7.4.2, “cl-dump.pl (Dumps and Decodes the Changelog)”

•

Section 7.4.3, “db2bak.pl (Creates a Backup of a Database)”

•

Section 7.4.4, “db2index.pl (Creates and Generates Indexes)”

•

Section 7.4.5, “db2ldif.pl (Exports Database Contents to LDIF)”

•

Section 7.4.6, “fixup-memberof.pl (Regenerate memberOf Attributes)”

•

Section 7.4.10, “migrate-ds-admin.pl”

•

Section 7.4.7, “ldif2db.pl (Import)”

•

Section 7.4.8, “logconv.pl (Log Converter)”

•

Section 7.4.11, “ns-accountstatus.pl (Establishes Account Status)”

•

Section 7.4.12, “ns-activate.pl (Activates an Entry or Group of Entries)”

•

Section 7.4.13, “ns-inactivate.pl (Inactivates an Entry or Group of Entries)”

•

Section 7.4.14, “ns-newpwpolicy.pl (Adds Attributes for Fine-Grained Password Policy)”

•

Section 7.4.16, “remove-ds.pl”

•

Section 7.4.17, “repl-monitor.pl (Monitors Replication Status)”

•

Section 7.4.18, “schema-reload.pl (Reload Schema Files Dynamically)”

•

Section 7.4.19, “setup-ds.pl”

•

Section 7.4.20, “setup-ds-admin.pl”

•

Section 7.4.21, “verify-db.pl (Check for Corrupt Databases)”

7.4.1. bak2db.pl (Restores a Database from Backup)

Restores a database from a backup.

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands