Red Hat 8.1, Command Reference Manual

Page: 208 / 372

Chapter 3. Plug-in Implemented Server Functionality Reference
194
Parameter Description
Example nsActiveChainingComponents: cn=uid
uniqueness, cn=plugins, cn=config
3.5.1.2. nsMaxResponseDelay
This error detection, performance-related attribute specifies the maximum amount of time it can take
a remote server to respond to an LDAP operation request made by a database link before an error
is suspected. Once this delay period has been met, the database link tests the connection with the
remote server.
Parameter Description
Entry DN cn=config, cn=chaining database, cn=plugins,
cn=config
Valid Values Any valid delay period in seconds
Default Value 60 seconds
Syntax Integer
Example nsMaxResponseDelay: 60
3.5.1.3. nsMaxTestResponseDelay
This error detection, performance-related attribute specifies the duration of the test issued by the
database link to check whether the remote server is responding. If a response from the remote server
is not returned before this period has passed, the database link assumes the remote server is down,
and the connection is not used for subsequent operations.
Parameter Description
Entry DN cn=config, cn=chaining database, cn=plugins,
cn=config
Valid Values Any valid delay period in seconds
Default Value 15 seconds
Syntax Integer
Example nsMaxTestResponseDelay: 15
3.5.1.4. nsTransmittedControls
This attribute, which can be both a global (and thus dynamic) configuration or an instance (that is,
cn=
database link instance
,
cn=chaining database, cn=plugins, cn=config
) configuration
attribute, allows the controls the database link forwards to be altered. The following controls are
forwarded by default by the database link:
• Managed DSA (OID: 2.16.840.1.113730.3.4.2)
• Virtual list view (VLV) (OID: 2.16.840.1.113730.3.4.9)
• Server side sorting (OID: 1.2.840.113556.1.4.473)