Red Hat 8.1, Command Reference Manual

Page: 179 / 372

Database Attributes under cn=config, cn=ldbm database, cn=plugins, cn=config
165
3.4.1.4. nsslapd-cache-autosize-split
This performance tuning-related attribute specifies the percentage of cache space to allocate to the
database cache. For example, setting this to
60
would give the database cache 60 percent of the
cache space and split the remaining 40 percent between the backend entry caches. That is, if there
were two databases, each of them would receive 20 percent. This attribute only applies when the
nsslapd-cache-autosize
attribute has a value of
0
.
NOTE
If the
nsslapd-cache-autosize
attribute and
nsslapd-cache-autosize-split
attribute are both set to high values, such as
100
, then the Directory Server may fail to
start and return error message. To fix this issue, reset the
nsslapd-cache-autosize
and
nsslapd-cache-autosize-split
attributes to a more reasonable level. For
example:
nsslapd-cache-autosize: 60
nsslapd-cache-autosize-split: 60
Parameter Description
Entry DN cn=config, cn=ldbm database, cn=plugins,
cn=config
Valid Range 0 to 99
Default Value 50 (This will not necessarily optimize operations.)
Syntax Integer
Example nsslapd-cache-autosize-split: 50
3.4.1.5. nsslapd-dbcachesize
This performance tuning-related attribute specifies the database index cache size, in bytes. This is one
of the most important values for controlling how much physical RAM the directory server uses.
This is not the entry cache. This is the amount of memory the Berkeley database backend will use
to cache the indexes (the
.db4
files) and other files. This value is passed to the Berkeley DB API
function
set_cachesize
. If automatic cache resizing is activated, this attribute is overridden when
the server replaces these values with its own guessed values at a later stage of the server startup.
For more technical information on this attribute, see the cache size section of the Berkeley DB
reference guide at
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/
env_set_cachesize.html
.
Attempting to set a value that is not a number or is too big for a 32-bit signed integer returns an
LDAP_UNWILLING_TO_PERFORM
error message with additional error information explaining the
problem.
The server has to be restarted for changes to this attribute to go into effect.
Parameter Description
Entry DN cn=config, cn=ldbm database, cn=plugins,
cn=config