Red Hat 8.1 Command Reference Manual Download Page 149

Page: 149 / 372

Legacy Replication Attributes

135

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.10. cirUpdateFailedAt

For consumer initiated replication, this attribute shows the time of the last failed updated attempt.

OID

2.16.840.1.113730.3.1.88

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.11. cirUpdateSchedule

For consumer-initiated replication, this attribute sets the schedule for replication.

OID

2.16.840.1.113730.3.1.87

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.12. cirUsePersistentSearch

This attribute sets whether to use persistent connections with consumer-initiated replication.

OID

2.16.840.1.113730.3.1.83

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.13. cirUseSSL

For consumer-initiated replication, this attribute sets whether to use SSL.

OID

2.16.840.1.113730.3.1.84

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.14. LDAPReplica (Object Class)

This object class defined replication for 4.x and older servers. This object class is defined in Directory
Server.

Superior Class

top

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands