Red Hat 8.1, Command Reference Manual

Page: 50 / 372

Chapter 2. Core Server Configuration Reference
36
• 7 - Read, write, and execute
In the 3-digit number, the first digit represents the owner's permissions, the second digit represents the
group's permissions, and the third digit represents everyone's permissions. When changing the default
value, remember that
000
does not allow access to the logs and that allowing write permissions to
everyone can result in the logs being overwritten or deleted by anyone.
The newly configured access mode only affects new logs that are created; the mode is set when the
log rotates to a new file.
Parameter Description
Entry DN cn=config
Valid Range 000 through 777
Default Value 600
Syntax Integer
Example nsslapd-errorlog-mode: 600
2.3.1.59. nsslapd-groupevalnestlevel
This attribute is deprecated, and documented here only for historical purposes.
The Access Control Plug-in does not use the value specified by the
nsslapd-
groupevalnestlevel
attribute to set the number of levels of nesting that access control performs
for group evaluation. Instead, the number of levels of nesting is hard-coded as
5
.
Parameter Description
Entry DN cn=config
Valid Range 0 to 5
Default Value 5
Syntax Integer
Example nsslapd-groupevalnestlevel: 5
2.3.1.60. nsslapd-idletimeout (Default Idle Timeout)
This attribute sets the amount of time in seconds after which an idle LDAP client connection is closed
by the server. A value of
0
means that the server never closes idle connections. This setting applies
to all connections and all users. Idle timeout is enforced when the connection table is walked, when
poll()
does not return zero. Therefore, a server with a single connection never enforces the idle
timeout.
Use the
nsIdleTimeout
operational attribute, which can be added to user entries, to override the
value assigned to this attribute. For details, see the "Setting Resource Limits Based on the Bind DN"
section in the
Directory Server Administrator's Guide
.
Parameter Description
Entry DN cn=config
Valid Range 0 to the maximum 32 bit integer value
(2147483647)
Default Value 0