Red Hat 8.1 Command Reference Manual Download Page 156

Page: 156 / 372

Chapter 3. Plug-in Implemented Server Functionality Reference

142

Plug-in Parameter

Description

Configurable Arguments

List of attributes (

uid mail userPassword

)

followed by "," and then suffixes on which the
check is to occur.

Dependencies

None

Performance Related Information

None

Further Information

If the Directory Server uses non-ASCII
characters, such as Japanese, turn this plug-in
off.

3.1.2. ACL Plug-in

Plug-in Parameter

Description

Plug-in Name

ACL Plug-in

DN of Configuration Entry

cn=ACL Plugin, cn=plugins, cn=config

Description

ACL access check plug-in

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Access control incurs a minimal performance hit.
Leave this plug-in enabled since it is the primary
means of access control for the server.

Further Information

See the "Managing Access Control" chapter in
the

Directory Server Administrator's Guide

3.1.3. ACL Preoperation Plug-in

Plug-in Parameter

Description

Plug-in Name

ACL Preoperation

DN of Configuration Entry

cn=ACL preoperation, cn=plugins, cn=config

Description

ACL access check plug-in

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

Database

Performance Related Information

Access control incurs a minimal performance hit.
Leave this plug-in enabled since it is the primary
means of access control for the server.

Further Information

See the "Managing Access Control" chapter in
the

Directory Server Administrator's Guide

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands