Red Hat 8.1 Command Reference Manual Download Page 160

Page: 160 / 372

Chapter 3. Plug-in Implemented Server Functionality Reference

146

Plug-in Parameter

Description

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Do not modify the configuration of this plug-in.
Leave this plug-in running at all times.

Further Information

See the "Advanced Entry Management" chapter
in the

Directory Server Administrator's Guide

3.1.11. Country String Syntax Plug-in

Plug-in Parameter

Description

Plug-in Name

Country String Syntax Plug-in

DN of Configuration Entry

cn=Country String Syntax, cn=plugins, cn=config

Description

Syntax for handling countries

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Do not modify the configuration of this plug-
in. Red Hat recommends leaving this plug-in
running at all times.

Further Information

3.1.12. Distinguished Name Syntax Plug-in

Plug-in Parameter

Description

Plug-in Name

Distinguished Name Syntax

DN of Configuration Entry

cn=Distinguished Name Syntax, cn=plugins,
cn=config

Description

Syntax for handling DNs

Configurable Options

on | off

Default Setting

Configurable Arguments

None

Dependencies

None

Performance Related Information

Do not modify the configuration of this plug-
in. Red Hat recommends leaving this plug-in
running at all times.

Further Information

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands