Red Hat 8.1, Command Reference Manual

Page: 47 / 372

cn=config
33
For error log rotation to be synchronized with time-of-day, this attribute must be enabled with the
nsslapd-errorlog-logrotationsynchour
and
nsslapd-errorlog-logrotationsyncmin
attribute values set to the hour and minute of the day for rotating log files.
For example, to rotate error log files every day at midnight, enable this attribute by setting its value to
on
, and then set the values of the
nsslapd-errorlog-logrotationsynchour
and
nsslapd-
errorlog-logrotationsyncmin
attributes to
0
.
Parameter Description
Entry DN cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsslapd-errorlog-logrotationsync-enabled: on
2.3.1.52. nsslapd-errorlog-logrotationsynchour (Error Log Rotation Sync
Hour)
This attribute sets the hour of the day for rotating error logs. This attribute must be used in
conjunction with
nsslapd-errorlog-logrotationsync-enabled
and
nsslapd-errorlog-
logrotationsyncmin
attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 23
Default Value 0
Syntax Integer
Example nsslapd-errorlog-logrotationsynchour: 23
2.3.1.53. nsslapd-errorlog-logrotationsyncmin (Error Log Rotation Sync
Minute)
This attribute sets the minute of the day for rotating error logs. This attribute must be used in
conjunction with
nsslapd-errorlog-logrotationsync-enabled
and
nsslapd-errorlog-
logrotationsynchour
attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 59
Default Value 0
Syntax Integer
Example nsslapd-errorlog-logrotationsyncmin: 30
2.3.1.54. nsslapd-errorlog-logrotationtime (Error Log Rotation Time)
This attribute sets the time between error log file rotations. The error log is rotated when this
time interval is up, regardless of the current size of the error log. This attribute supplies only the