Red Hat 8.1 Command Reference Manual Download Page 209

Page: 209 / 372

Database Link Attributes under cn=default instance config, cn=chaining database, cn=plugins, cn=config

195

Parameter

Description

Entry DN

cn=config, cn=chaining database, cn=plugins,
cn=config

Valid Values

Any valid OID or the above listed controls
forwarded by the database link

Default Value

None

Syntax

Integer

Example

nsTransmittedControls: 1.2.840.113556.1.4.473

3.5.2. Database Link Attributes under cn=default instance config,

cn=chaining database, cn=plugins, cn=config

Default instance configuration attributes for instances are housed in the

cn=default instance

config, cn=chaining database, cn=plugins, cn=config

tree node.

3.5.2.1. nsAbandonedSearchCheckInterval

This attribute shows the number of seconds that pass before the server checks for abandoned
operations.

Parameter

Description

Entry DN

cn=default instance config, cn=chaining
database, cn=plugins, cn=config

Valid Range

0 to maximum 32-bit integer (2147483647)
seconds

Default Value

Syntax

Integer

Example

nsAbandonedSearchCheckInterval: 10

3.5.2.2. nsBindConnectionsLimit

This attribute shows the maximum number of TCP connections the database link establishes with the
remote server.

Parameter

Description

Entry DN

cn=default instance config, cn=chaining
database, cn=plugins, cn=config

Valid Range

1 to 50 connections

Default Value

Syntax

Integer

Example

nsBindConnectionsLimit: 3

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands