Red Hat 8.1 Command Reference Manual Download Page 164

Page: 164 / 372

Chapter 3. Plug-in Implemented Server Functionality Reference

150

3.1.20. Legacy Replication Plug-in

Plug-in Parameter

Description

Plug-in Name

Legacy Replication Plug-in

DN of Configuration Entry

cn=Legacy Replication plug-in, cn=plugins,
cn=config

Description

Enables a current version Directory Server to be
a consumer of a 4.x supplier

Configurable Options

on | off

Default Setting

off

Configurable Arguments

None. This plug-in can be disabled if the server
is not (and never will be) a consumer of a 4.x
server.

Dependencies

Database

Performance Related Information

None

Further Information

See the "Managing Replication" chapter in the

Directory Server Administrator's Guide

3.1.21. MemberOf Plug-in

Plug-in Information

Description

Plug-in Name

MemberOf

Configuration Entry DN

cn=MemberOf Plugin,cn=plugins,cn=config

Description

Manages the

memberOf

attribute on user

entries, based on the

member

attributes in the

group entry.

Configurable Options

on | off

Default Setting

off

Configurable Arguments

memberofattr

sets the attribute to generate in

people's entries to show their group membership.

memberofgroupattr

sets the attribute to use

to identify group member's DNs.

Dependencies

None

Performance Related Information

None

Further Information

Table 3.2. Details of MemberOf Plug-in

3.1.22. Multi-master Replication Plug-in

Plug-in Parameter

Description

Plug-in Name

Multi-master Replication Plug-in

DN of Configuration Entry

cn=Multimaster Replication plugin, cn=plugins,
cn=config

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands