Red Hat 8.1 Command Reference Manual Download Page 147 | Manualshive

Page: 147 / 372

background image

Legacy Replication Attributes

133

Attribute

Definition

cirPort

Identifies the port of the supplier.

cirBindDN

Specifies the bind DN.

cirUsePersistentSearch

Specifies a flag whether or not to use the
persistent search.

cirUseSSL

Specifies a flag whether or not to use SSL.

cirBindCredentials

Specifies a password of cirBindDN.

cirLastUpdateApplied

Timestamp of the last replica update.

cirUpdateSchedule

Schedule when the replica update occurs.

cirSyncInterval

Identifies the interval to do synchronization.

cirUpdateFailedAt

Stores the timestamp of the last failed update
attempt.

cirBeginORC

Sets whether the database deletes its contents
before beginning replication.

replicaNickname

Identifies the name for the replication agreement.

replicaEntryFilter

Identifies the entries to be replicated.

replicatedAttributeList

Identifies attribute list to be replicated.

2.5.2.2. cirBeginORC

For online replication creation (ORC), the consumer server can dump its entire database and allows
the supplier to send it completely fresh information. The

cirBeginORC

attribute sets whether the

consumer deletes its database. Its values are either

start

or

stop

.

OID

2.16.840.1.113730.3.1.90

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.3. cirBindCredentials

For consumer-initiated replication, this attribute is used to identify the bind password for the replication
identity.

OID

2.16.840.1.113730.3.1.85

Syntax

IA5String

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.4. cirBindDN

For consumer-initiated replication, this attribute gives the username for the server to bind to the
supplier as.

OID

2.16.840.1.113730.3.1.82

«
...
145
146
147
148
149
...
»

Summary of Contents for 8.1





















































































































































































































































































































































































Reviews:

No comments

Related manuals for 8.1

Brand: 360 Systems Pages: 117

Brand: Hi-flying Pages: 29

Brand: Belkin Pages: 8

SC450NX - Server Platform - 0 MB RAM

Brand: Intel Pages: 200

SUPERSERVER 5015M-NT

Brand: Supero Pages: 134

AirPlus G DP-G301

Brand: D-Link Pages: 18

ZXCLOUD iBox CT220

Brand: Zte Pages: 16

Brand: Silicon Graphics Pages: 30

Brand: AirLive Pages: 133

Brand: Rittal Pages: 16

Brand: Intel Pages: 67

X38ML - Server Board Motherboard

Brand: Intel Pages: 132

Brand: Lantronix Pages: 162

Brand: Quest Engineering Pages: 181

PowerEdge R740xd2

Brand: Dell EMC Pages: 43

301138U - Ethernet Disk Mini NAS Server

Brand: LaCie Pages: 55

Power System 9009-22G

Brand: IBM Pages: 76

Brand: IBM Pages: 233

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands