Red Hat 8.1, Command Reference Manual

Page: 85 / 372

cn=changelog5
71
2.3.2.2. nsslapd-changelogmaxage (Max Changelog Age)
This attribute sets the maximum age of any entry in the changelog. The changelog contains a
record for each directory modification and is used when synchronizing consumer servers. Each
record contains a timestamp. Any record with a timestamp that is older than the value specified in
this attribute is removed. If this attribute is absent, there is no age limit on changelog records. For
information on the changelog, see
Section 2.3.2.1, “nsslapd-changelogdir”
.
The server has to be restarted for changes to this attribute to go into effect.
Parameter Description
Entry DN cn=changelog5,cn=config
Valid Range 0 (meaning that entries are not removed
according to their age) to maximum 32-bit integer
(2147483647)
Default Value 0
Syntax DirectoryString
IntegerAgeID
where
AgeID
is
s
for seconds,
m
for minutes,
h
for hours,
d
for
days, and
w
for weeks
Example nsslapd-changelogmaxage: 30d
2.3.2.3. nsslapd-changelogmaxentries (Max Changelog Records)
This attribute sets the maximum number of records the changelog may contain. If this attribute is
absent, there is no maximum number of records the changelog can contain. For information on the
changelog, see
Section 2.3.2.1, “nsslapd-changelogdir”
.
The server has to be restarted for changes to this attribute to go into effect.
Parameter Description
Entry DN cn=changelog5,cn=config
Valid Range 0 (meaning that the only maximum limit is
the disk size) to maximum 32-bit integer
(2147483647)
Default Value 0
Syntax Integer
Example nsslapd-changelogmaxentries: 5000
2.3.2.4. changes
This attribute contains the changes made to the entry for add and modify operations in LDIF format.
OID 2.16.840.1.113730.3.1.8
Syntax Binary
Multi- or Single-Valued Multi-valued
Defined in Changelog Internet Draft