Red Hat 8.1 Command Reference Manual Download Page 137 | Manualshive

Page: 137 / 372

background image

nsDS5ReplicationAgreement (Object Class)

123

nsDS5ReplicaType

Defines the type of replica, such as a read-only
consumer.

nsDS5Task

Launches a replication task, such as dumping
the database contents to LDIF; this is used
internally by the Directory Server supplier.

nsState

Stores information on the clock so that proper
change sequence numbers are generated.

2.4.7. nsDS5ReplicationAgreement (Object Class)

Entries with the

nsDS5ReplicationAgreement

object class store the information set in a replication

agreement. Information on the attributes for this object class are in chapter 2 of the

Directory Server

Configuration, Command, and File Reference

.

This object class is defined in Directory Server.

Superior Class

top

OID

2.16.840.1.113730.3.2.103

Required Attributes

objectClass

Defines the object classes for the entry.

cn

Used for naming the replication agreement.

Allowed Attributes

description

Contains a free text description of the replication
agreement.

nsDS5BeginReplicaRefresh

Initializes a replica manually.

nsds5debugreplicatimeout

Gives an alternate timeout period to use when
the replication is run with debug logging.

nsDS5ReplicaBindDN

Specifies the DN to use when a supplier server
binds to a consumer.

nsDS5ReplicaBindMethod

Specifies the method (SSL or simple
authentication) to use for binding.

nsDS5ReplicaBusyWaitTime

Specifies the amount of time in seconds a
supplier should wait after a consumer sends
back a busy response before making another
attempt to acquire access.

nsDS5ReplicaChangesSentSinceStartup

The number of changes sent to this replica since
the server started.

nsDS5ReplicaCredentials

Specifies the password for the bind DN.

nsDS5ReplicaHost

Specifies the hostname for the consumer replica.

«
...
135
136
137
138
139
...
»

Summary of Contents for 8.1





















































































































































































































































































































































































Reviews:

No comments

Related manuals for 8.1

Brand: HYVE Pages: 22

Brand: ExtraHop Pages: 5

Brand: Hi-flying Pages: 29

NSLU2 - Network Storage Link NAS Server

Brand: Linksys Pages: 64

RS/6000 44P Series 270

Brand: IBM Pages: 346

Brand: Hanwha Vision Pages: 16

ProLiant DL100 G2 DPSS

Brand: HP Pages: 155

NetStorage 6000

Brand: HP Pages: 192

ProLiant DL100 G2 DPSS

Brand: HP Pages: 44

Brand: Lightwave Communications Pages: 97

Titan SiliconServer

Brand: Blue Arc Pages: 487

DIRECTORY SERVER 2.0 - GATEWAY

Brand: Red Hat Pages: 66

Brand: Lantronix Pages: 78

Brand: Wyse Pages: 4

Brand: Wyse Pages: 62

Brand: Converters.TV Pages: 20

Brand: IBM Pages: 70

Brand: Acnodes Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands