Red Hat 8.1, Command Reference Manual

Page: 210 / 372

Chapter 3. Plug-in Implemented Server Functionality Reference
196
3.5.2.3. nsBindRetryLimit
Contrary to what the name suggests, this attribute does not specify the number of times a database
link
re
tries to bind with the remote server but the number of times it
tries
to bind with the remote
server. A value of
1
here indicates that the database link only attempts to bind once.
NOTE
Retries only occur for connection failures and not for other types of errors, such as invalid
bind DNs or bad passwords.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 0 to 5
Default Value 3
Syntax Integer
Example nsBindRetryLimit: 3
3.5.2.4. nsBindTimeout
This attribute shows the amount of time before the bind attempt times out. There is no real valid range
for this attribute, except reasonable patience limits.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 0 to 60 seconds
Default Value 15
Syntax Integer
Example nsBindTimeout: 15
3.5.2.5. nsCheckLocalACI
Reserved for advanced use only.
This attribute controls whether ACIs are evaluated on the database
link as well as the remote data server. Changes to this attribute only take effect once the server has
been restarted.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsCheckLocalACI: on