Red Hat 8.1 Command Reference Manual Download Page 107 | Manualshive

Page: 107 / 372

background image

Synchronization Attributes under cn=syncAgreementName, cn=WindowsReplica,cn="suffixName", cn=mapping tree, cn=config

93

2.3.8.25. nsDS50ruv

This attribute stores the last replica update vector (RUV) read from the consumer of this replication
agreement. It is always present and must not be changed.

2.3.8.26. nsruvReplicaLastModified

This attribute contains the most recent time that an entry in the replica was modified and the
changelog was updated.

2.3.9. Synchronization Attributes under cn=syncAgreementName,

cn=WindowsReplica,cn="suffixName", cn=mapping tree, cn=config

The synchronization attributes that concern the synchronization agreement are stored
under

cn=

syncAgreementName

,

cn=WindowsReplica, cn=

suffixDN

,

cn=mapping

tree, cn=config

. The

cn=

syncAgreementName

entry is an instance of the

nsDSWindowsReplicationAgreement

object class. For synchronization agreement configuration

attributes to be taken into account by the server, this object class (in addition to the

top

object class)

must be present in the entry. Synchronization agreements are configured only on databases that are
enabled to synchronize with Windows Active Directory servers.

cn

nsDS5ReplicaLastUpdateEnd

description

nsDS5ReplicaLastUpdateStart

nsDS5ReplicaBindDN (the Windows sync
manager ID)

nsDS5ReplicaLastUpdateStatus

nsDS5ReplicaBindMethod

nsDS5ReplicaPort

nsDS5ReplicaBusyWaitTime

nsDS5ReplicaRoot

nsDS5ReplicaChangesSentSinceStartup

nsDS5ReplicaSessionPauseTime

nsDS5ReplicaCredentials (the Windows sync
manager password)

nsDS5ReplicaTimeout

nsDS5ReplicaHost (the Windows host)

nsDS5ReplicaTransportInfo

nsDS5ReplicaLastInitEnd

nsDS5ReplicaUpdateInProgress

nsDS5ReplicaLastInitStart

nsDS5ReplicaUpdateSchedule

nsDS5ReplicaLastInitStatus

nsDS50ruv

Table 2.7. List of Attributes Shared Between Replication and Synchronization Agreements

2.3.9.1. nsds7DirectoryReplicaSubtree

The suffix or DN of the Directory Server subtree that is being synchronized.

Parameter

Description

Entry DN

cn=

syncAgreementName

, cn=replica,

cn=

suffixDN

, cn=mapping tree, cn=config

Valid Values

Any valid suffix or subsuffix

Default Value
Syntax

DirectoryString

«
...
105
106
107
108
109
...
»

Summary of Contents for 8.1





















































































































































































































































































































































































Reviews:

No comments

Related manuals for 8.1

Brand: Datacom Pages: 89

Brand: Vicon Pages: 2

3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print...

Brand: 3Com Pages: 94

Express5800/320Fa-L

Brand: NEC Pages: 406

DocuColor 45087638

Brand: Xerox Pages: 28

PLATINIUM 9000-4R

Brand: MAXDATA Pages: 18

Brand: QNAP Pages: 61

Brand: QNAP Pages: 203

WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server

Brand: Linksys Pages: 76

WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print Server

Brand: Linksys Pages: 132

Brand: HazSim Pages: 27

Brand: XtendLan Pages: 54

Brand: Medion Pages: 112

Brand: VisionxIP Pages: 77

Rackable C2005 2U

Brand: Silicon Graphics Pages: 46

Brand: Silicon Graphics Pages: 162

Brand: NASdeluxe Pages: 94

Brand: Check Point Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands