Red Hat 8.1 Command Reference Manual Download Page 226

Page: 226 / 372

Chapter 4. Server Instance File Reference

212

File or Directory

Location

PID

/var/run/dirsrv

Tools

/usr/bin
/usr/sbin
/usr/lib64/mozldap6

Instance directory

/usr/lib64/dirsrv/slapd-

instance

Table 4.2. Red Hat Enterprise Linux 4 and 5 (x86_64)

File or Directory

Location

Backup files

/var/opt/dirsrv/slapd-

instance

/bak

Configuration files

/etc/opt/dirsrv/slapd-

instance

Database files

/var/opt/dirsrv/slapd-

instance

/db

Runtime files

/var/opt/dirsrv/

instance

LDIF files

/var/opt/dirsrv/slapd-

instance

/ldif

Log files

/var/opt/log/dirsrv/slapd-

instance

Tools

/opt/dirsrv/bin/
/opt/dirsrv/sbin/

Instance directory

/opt/dirsrv/slapd-

instance

Libraries

/opt/dirsrv/lib/

Table 4.3. HP-UX 11i (IA64)

4.2. Backup Files

Each Directory Server instance contains the following directory and file for storing backup-related files:

•

/var/lib/dirsrv/slapd-

instance_name

/bak

— This contains a directory

dated with the

instance_name

, time and date of the database backup, such as

instance_name

-2009_05_02_16_56_05/

, which in turn holds the database backup copy.

•

/etc/dirsrv/slapd-

instance_name

/dse_original.ldif

— This is a backup copy of the

dse.ldif

configuration file from the time of installation.

4.3. Configuration Files

Each Directory Server instance stores its configuration files in the

/etc/dirsrv/

slapd-

instance_name

directory. The configuration files in this directory are explained in

Section 2.1, “Overview of the Directory Server Configuration”

4.4. Database Files

Each Directory Server instance contains the

/var/lib/dirsrv/slapd-

instance_name

/db

directory for storing all of the database files. The following is a sample listing of the

/var/lib/

dirsrv/slapd-

instance_name

/db

directory contents.

__db.001 __db.003 __db.005 NetscapeRoot/

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands