Red Hat 8.1 Command Reference Manual Download Page 120

Page: 120 / 372

Chapter 2. Core Server Configuration Reference

106

nsTaskTotalItems

This attributes shows the total number of subtasks that must be completed for the task operation.
When the

nsTaskCurrentItem

attribute has the same value as

nsTaskTotalItems

, then the task

is completed.

This attribute value is set by the server and

should not

be edited.

Parameter

Description

Entry DN

cn=

task_name

, cn=

task_type

, cn=tasks,

cn=config

Valid Values

0 to the maximum 32 bit integer value
(2147483647)

Default Value
Syntax

Integer

Example

nsTaskTotalItems: 152

nsTaskCancel

This attribute allows a task to be aborted while in progress. This attribute can be modified by users.

Parameter

Description

Entry DN

cn=

task_name

, cn=

task_type

, cn=tasks,

cn=config

Valid Values

true | false

Default Value
Syntax

Case-insensitive string

Example

nsTaskCancel: true

ttl

This attribute sets the amount of time (in seconds) the task entry will remain in the DSE after the
task has finished or aborted. Setting a

ttl

attribute allows the task entry to be polled for new status

information without missing the exit code. Setting the

ttl

attribute to

means that the entry is not

cached.

Parameter

Description

Entry DN

cn=

task_name

, cn=

task_type

, cn=tasks,

cn=config

Valid Values

0 (cannot be cached) to the maximum 32 bit
integer value (2147483647)

Default Value
Syntax

DirectoryString

Example

ttl: 120

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands