Red Hat 8.1 Command Reference Manual Download Page 148

Page: 148 / 372

Chapter 2. Core Server Configuration Reference

134

Syntax

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.5. cirHost

For consumer-initiated replication, this contains the hostname of the supplier server.

OID

2.16.840.1.113730.3.1.80

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.6. cirLastUpdateApplied

For consumer-initiated replication, this attribute stores the change number of the last change sent to
the consumer.

OID

2.16.840.1.113730.3.1.86

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.7. cirPort

In consumer-initiated replication, this attribute gives the port number of the supplier.

OID

2.16.840.1.113730.3.1.81

Syntax

DirectoryString

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.8. cirReplicaRoot

In consumer-initiated replication, this attribute gives the DN of the subtree to replicate.

OID

2.16.840.1.113730.3.1.79

Syntax

Multi- or Single-Valued

Multi-valued

Defined in

Directory Server

2.5.2.9. cirSyncInterval

In consumer-initiated replication, this sets the time interval between sending updates.

OID

2.16.840.1.113730.3.1.89

Syntax

DirectoryString

Summary of Contents for 8.1





















































































































































































































































































































































































Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands

Red Hat 8.1, Command Reference Manual

Search results

Summary of Contents for 8.1

Reviews:

Related manuals for 8.1

Brands by name

Popular brands