Yawarra ALIX 1 Quick Start Manual Download Page 1

Page: 1 / 4

Rack mount ALIX 1

Quick Start Guide

Thank you for purchasing a rack mount ALIX 1 server.

Your package should contain:



1RU server case



Cover plate and hex screws for empty board slots

Optional Extras



1 x mounting kit to suit the ALIX 1 board

➢

punched cover plate, 2 x hex screws, hex key, board mounting plate, 8 x

M3 x 5 screws



1 x ALIX 1 board



1 x ALIX 1 hard drive bracket



1 x mounting kit to suit a PCI card

➢

punched cover plate, 2 x hex screws, hex key, PCI mounting plate, 6 – 8 x

M3 x 5 screws, 3 x M3 x 20 standoffs

Please read the following instructions to begin using your rack mount ALIX 1.

April 2014

Summary of Contents for ALIX 1

Page 1: ...kit to suit the ALIX 1 board punched cover plate 2 x hex screws hex key board mounting plate 8 x M3 x 5 screws 1 x ALIX 1 board 1 x ALIX 1 hard drive bracket 1 x mounting kit to suit a PCI card punch...

Page 2: ...all the board into the server case optional If your board is not installed in the rack mount ALIX 1 you may need to do the following 1 Remove the five 5 screws from the top of the case and remove the...

Page 3: ...in the slot and then lay it onto the board pressing down until the locking tabs on either side of the card click into place Step 4 Install the PCI card optional 1 Using your PCI card as a guide deter...

Page 4: ...d slave Step 6 Connect to the ALIX directly optional If you want to configure your operating system directly you will need to connect a VGA monitor and a USB or PS2 keyboard and mouse to the ALIX 1 St...