Remote-Control Commands
Satellite Navigation
269
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIGNal:L2Band:B2I:PILot:SCODe[:
STATe]
<State>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIGNal:L1Band:E1OS:PILot:
SCODe[:STATe]
<State>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIGNal:L1Band:E1OS:DATA:
SCODe[:STATe]
<State>
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
1
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIGNal:L1Band:CA:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SIGNal:L1Band:CA:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIGNal:L1Band:E1OS:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIGNal:L2Band:CA:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIGNal:L1Band:CA:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIGNal:L2Band:B2I:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIGNal:L1Band:B1I:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:CA:DATA:NMESsage:
CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:P:DATA:NMESsage:
CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:L2C:DATA:
NMESsage:CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L1Band:P:DATA:NMESsage:
CONTrol
<NavMsgControl>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L1Band:CA:DATA:NMESsage:
CONTrol
<NavMsgControl>
Defines whether the navigation message parameters can be changed or not.
Parameters:
<NavMsgControl>
OFF | EDIT | AUTO
OFF
Disables sending the navigation message.
EDIT
Enables configuration of the navigation message.
AUTO
Navigation message is generated automatically.
*RST:
AUTO
Signals and Power Configuration per Satellite