Remote-Control Commands
Satellite Navigation
270
User Manual 1178.6379.02 ─ 01
Example:
See
Example "Configuring the SV power and modulation control
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIGNal:L1Band:CA:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SIGNal:L1Band:CA:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIGNal:L1Band:E1OS:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIGNal:L2Band:CA:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIGNal:L1Band:CA:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIGNal:L2Band:B2I:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIGNal:L1Band:B1I:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:CA:DATA:NMESsage:
TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:P:DATA:NMESsage:
TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L2Band:L2C:DATA:
NMESsage:TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L1Band:P:DATA:NMESsage:
TYPE
<Data>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIGNal:L1Band:CA:DATA:NMESsage:
TYPE
<Data>
Sets the data source used for the generation of the navigation message.
Parameters:
<Data>
ZERO | ONE | PATTern | PN9 | PN11 | PN15 | PN16 | PN20 |
PN21 | PN23 | DLISt | RNData | ZNData
RNData
Summary indication for real navigation data.
Current navigation message type depends on the GNSS system
and the RF band, e.g. for GPS in L1 RNData means LNAV.
*RST:
RNData
Example:
See
Example "Configuring the SV power and modulation control
Manual operation:
See
"Nav Msg Type, Pattern, Data List"
Signals and Power Configuration per Satellite