Remote-Control Commands
Satellite Navigation
246
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:MPATh[:V<us>:A<gr>]:LOS:POWer?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:MPATh[:V<us>:A<gr>]:ECHO<s2us0>:
POWer
<PowerOffset>
Sets the additional power offset for the selected echoes.
Parameters:
<PowerOffset>
float
Range:
-15 to 0
Increment: 0.01
*RST:
0
Default unit: dB
Example:
See
Example "Enabling static multipath effects"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:MPATh[:V<us>:A<gr>]:LOS:
CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:MPATh[:V<us>:A<gr>]:
ECHO<s2us0>:CPHase
<CarrierPhase>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:MPATh[:V<us>:A<gr>]:LOS:
CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:MPATh[:V<us>:A<gr>]:
ECHO<s2us0>:CPHase
<CarrierPhase>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:MPATh[:V<us>:A<gr>]:LOS:
CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:MPATh[:V<us>:A<gr>]:
ECHO<s2us0>:CPHase
<CarrierPhase>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:MPATh[:V<us>:A<gr>]:LOS:
CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:MPATh[:V<us>:A<gr>]:
ECHO<s2us0>:CPHase
<CarrierPhase>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:MPATh[:V<us>:A<gr>]:LOS:
CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:MPATh[:V<us>:A<gr>]:
ECHO<s2us0>:CPHase
<CarrierPhase>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:MPATh[:V<us>:A<gr>]:LOS:CPHase?
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:MPATh[:V<us>:A<gr>]:ECHO<s2us0>:
CPHase
<CarrierPhase>
Sets the carrier phase at the simulation start.
Parameters:
<CarrierPhase>
float
Range:
0 to 6.28
Increment: 0.01
*RST:
0
Default unit: rad
Example:
See
Example "Enabling static multipath effects"
Manual operation:
See
Static Multipath Configuration