Real-World Environment
Satellite Navigation
86
User Manual 1178.6379.02 ─ 01
10. Select "Display > Position" with "3D View > On" to observe the 3D positioning of
the three antennas.
11. Select "GNSS > General > State > On" to enable signal generation.
12. Select "Signal Monitor > Satellites > Sky View".
The display is updated in real time. You can observe how depending on the current
GNSS receiver position, the spinning rate and the current active antenna the
received GNSS signal changes.
13. Select "Satellites > Power View".
How to Simulate Real-Word Effects