Signal Generation Control
Satellite Navigation
200
User Manual 1178.6379.02 ─ 01
18.2 Marker Settings
Access:
► Select "GNSS > Marker".
This tab provides access to the settings necessary to select and configure the
marker output signal, like the marker mode or marker delay settings.
This section focuses on the available settings.
For information on how these settings affect the signal, refer to section "Basics on ..."
in the R&S
SMW user manual.
Routing and enabling a marker
The provided marker signals are not dedicated to a particular connector. They can be
mapped to one or more globally shared USER or local T/M connectors.
To route and enable a marker signal, perform the following
general steps
:
●
Define the shape of the generated marker, i.e. select the "Marker > Mode".
●
Define the connector (USER or T/M) where the selected signal is provided.
Use the
Local and Global Connector Settings
Settings:
Marker Settings
