Remote-Control Commands
Satellite Navigation
379
User Manual 1178.6379.02 ─ 01
Example: Multi-band GNSS signal
// select advanced mode
SCONfiguration:MODE GNSS
SCONfiguration:APPLy
// enable GPS in RF bands L1 and L2
SOURce1:BB:GNSS:SYSTem:GPS:STATe 1
SOURce1:BB:GNSS:
L1Band:STATe 1
SOURce1:BB:GNSS:
L2Band:STATe 1
// define th signals, for example:
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:CA:STATe 1
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:P:STATe 1
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L2Band:L2C:STATe 1
SOURce1:BB:GNSS:VEHicle:COUNt 1
// define the output signal
// e.g. route the L1 and L2 signals to the RF outputs
SOURce1:BB:GNSS:STReam1:STATe 1
SOURce1:BB:GNSS:STReam2:STATe 1
SOURce1:BB:GNSS:STReam1:VEHicle 1
SOURce1:BB:GNSS:STReam2:VEHicle 1
SOURce1:BB:GNSS:STReam1:ANTenna A1
SOURce1:BB:GNSS:STReam2:ANTenna A1
SOURce1:BB:GNSS:
STReam1
:RFBand
L1
SOURce1:BB:GNSS:
STReam2
:RFBand
L2
Example: Multi-antenna receiver
// select advanced mode
SCONfiguration:MODE GNSS
SCONfiguration:APPLy
// one receiver with 2 antennas
SOURce1:BB:GNSS:
VEHicle
:COUNt
1
SOURce1:BB:GNSS:RECeiver:V1:POSition MOV
SOURce1:BB:GNSS:RECeiver:V1:
ANTenna
:COUNt
2
SOURce1:BB:GNSS:RECeiver:V1:A1:BODY:FILE "Car_Medium.body_mask"
SOURce1:BB:GNSS:RECeiver:V1:A1:APATtern:FILE "PatchAntenna.ant_pat"
SOURce1:BB:GNSS:RECeiver:V1:A2:BODY:FILE "Car_Medium.body_mask"
SOURce1:BB:GNSS:RECeiver:V1:A1:DX 0.9
SOURce1:BB:GNSS:RECeiver:V1:A2:DX -0.9
// define the output signal
// e.g. route the A1 and A2 signals to the RF outputs
SOURce1:BB:GNSS:STReam1:STATe 1
SOURce1:BB:GNSS:STReam2:STATe 1
SOURce1:BB:GNSS:STReam1:VEHicle 1
SOURce1:BB:GNSS:STReam2:VEHicle 1
SOURce1:BB:GNSS:STReam1:RFBand L1
SOURce1:BB:GNSS:STReam2:RFBand L1
SOURce1:BB:GNSS:
STReam1
:ANTenna
A1
SOURce1:BB:GNSS:
STReam2
:ANTenna
A2
Advanced Mode Commands